Articles

Virtuino - Arduino UNO + Ethernet Shield example

Virtuino on Play Store

Virtuino Tutorial 02 : Ethernet Shield Web Server 

Tutorial description:

Enable or disable a LED connected to Arduino pin 6 via Virtuino App using Interner connection

Step 1: Arduino connections

Connect a Led to Arduino pin 6

Step 2: Arduino code

Click the link below to download Virtuino Library (Don't unzip the downloaded file)

Virtuino Library ver 1.1 Download

1. Run Arduino IDE software to add Virtuino library
2. Go to Menu/Sketch/Include Library/Add .ZIP Library

Find and Load Virtuino Library zip file you have just downloaded

1. Go to Menu/File/Examples/Virtuino_Library/
2. Select: webserver_ethernet_shield_example_01

On the code enter the a correct IP address.

This depends on your router IP

If your Router IP is 192.168.1.1 enter an ip like 192.168.1.150

If your Router IP is 192.168.2.1 enter an ip like 192.168.2.150 etc.

When you are ready connect Arduino board to a USB port  and upload the code

Step 3: Virtuino app settings

Enable your Android device internet connection 

Run Virtuino app